Overview
An optional USB cable is available for connection to a PC or Mac. The USB connector can be connected directly to the USB port on the PC or Mac via the optional USB cable. To enable connection of the AIS transceiver to a PC the USB drivers, You need to download and install the driver from the link below. Driver installation is typically not required for use with a Mac.
Features
- Meets IMO standards
- Meets FCC, USCG, IC, TC, CCNR (Inland AIS)
- Chart display available by C-MAP MAX (on a Non-SOLAS or Inland vessel only)
- Simple menu display with icons
- Water and weather proof (IPX6 & IPX7)
Specifications
| Documentation | ||
| Manual | Operation Manual | v7 |
| Quick Start Guide | v1 | |
| Quick Operation Guide | v1 | |
| Pilot Plug to PI2 Wiring | v1 | |
| mounting template | v1 |
Additional specifications
| Output power | 1 W or 12.5 W (automatic selection) |
| Display size and type | 5 inch, color LCD with adjustable backlight |
| TX / RX frequency | 156.025 MHz to 162.025 MHz |
| Chanel bandwidth | 25 kHz |
| Receiver channels | 32 channels GPS and GLONASS operating modes |
| Frequency | L1 GPS band, 1575.42 MHz and L1 GLONASS band 1597.1 to 1609.5 MHz |
| Sensitivity | < -107 dBm for 20% PER (TDMA Transmitter / Receiver) -107 dBm@BER < 10-2 (DSC Receiver) |
| Position fixing system | EPFS |
| Accuracy | 2.5 m CEP / 5.0 m SEP without differential correction 2.0 m CEP / 3.0 m SEP with SBAS or RTCM DGPS correction |
| Power supply | 10.8V to 31.2V |
Additional specifications
| 主な機能 | 拡大、オート、Aスコープ、表示色：64色/16色/8色/モノクロを選択、探知範囲表示、画像記憶、ホーミング、ソナトーン®、潮汐グラフ表示、魚体長表示、外部同期 |
| 測深範囲 | 2.5 ～ 2,000 (m)、2.5 ～ 1100 (ヒロ) |
| 送信出力 | 1kW |
Documentation
Full manufacturer information: www.koden-electronics.co.jp
Request a quote for this product (model KAT-330)
